72 W RGB LED strip
Individual Pixel Control
5 metre
300 LEDs and 50 pixels (6 LEDs per pixel)
Self-adhesive 3 m backing
Suitable for placing in any aluminium profile
The Artecta Havana Pixel Strip is a 72 watt RGB LED-strip with Individual Pixel Control, suitable for indoor applications. Its 300 LEDs (60 / m) are controllable per set of 6 LEDs, enabling you to create 50 individual controllable pixels that can be controlled in combination with a suitable pixel controller. Up to three Havana Pixel Strips are daisy-chainable and can run on one single 24 V power adapter. The strip can be attached to almost any smooth degreased surface due to its self-adhesive 3 m backing. Also, the strip can be used perfectly in an aluminium profile with a cover for protection against dust and moisture.
Please note that mounting Havana Pixel Strips in aluminium profiles is highly recommended for sufficient heat dissipation when planning to increase its power intensity to over 80 %.
Light Source Quantity/m: 60
Light Source System: SW2811
LED Colour Type: RGB
Lumen output/m: 430 lm
CRI: 82
CCT: 0 K
Power Supply: 24 VDC
Power Consumption: 72 W
Power/1 m: 14.4 W
Length (m): 5 m
Cutting Length: 100 mm
Width (mm): 10 mm
IP Rating: IP20 (indoor use only)
