The Laserworld PL-30.000RGB MK3 show laser light is completely equipped with diodes and has a
good white balance, with
linear color fading behaviour and
high visibility.
The Laserworld PL-30.000RGB MK3 units have a built-in network DAC for Showcontroller and Showeditor, but also
can be controlled with any ILDA laser control software such as Pangolin Quickshow, Pangolin Beyond, LSX, Lasergraph DSP, etc. via external ILDA interface (e.g. FB3). They also have a
built-in memory with pre-set patterns, that can be easily triggered through
DMX or
automatic mode.
The Laserworld PL-30.000RGB MK3 comes with
integrated ShowNET network interface and free laser show software. Details in the box below.
Advantages of the Laserworld PL-30.000RGB MK3 laser light are:
- a low-cost yet powerful solution for power demanding laser applications
- great for large nightclubs and big stages
- brilliant colors with great linear color fading behavior
- ideal for long distance beam shows and basic graphics projections
The Laserworld PL-30.000RGB MK3 has a beam diameter of about ca. 6.5 mm and beam divergence of ca. 1.0 mrad.
Guaranteed output power at aperture is 30'000 mW. 9'000 mW / 638 nm (red), 12'000 mW / 520 nm (green), 12'000 mW / 450 nm (blue).
Fast scanners work at a speed of 40kpps @ 8° ILDA and can do a max. scan angle of 50°.
The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part). Thus the maintenance effort is kept very low.
The show laser has an internal PSU for easy handling.
At the back of the unit there are trim pots for color settings, so the color balance can be quickly adjusted. The X- / Y-axis can also be mirrored through switches. Additionally the scan safety can be set at the backside of the laser system.
+ Integrated ShowNET incl. free laser show software
The Laserworld PL-30.000RGB MK3 features an integrated ShowNET network interface with free laser control software included!
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new Laserworld PL-30.000RGB MK3 for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes:
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming
