Power supply: | 100-240 V AC, 50/60 Hz |
Power output (RMS): | |
Stereo, parallel at 4 ohms | 4 x 1100 W |
Stereo, parallel at 8 ohms | 4 x 650 W |
8 ohms bridged | 2 x 2000 W |
Signal-to-Noise ratio: | >100 dB |
Total harmonic distortion: | <0.1 % |
Damping factor: | >500 |
Slew rate: | >10 V/µsec |
Crosstalk: | >65 dB |
Input sensitivity: | 0.775 V/1.0 V/1.81 V or 39.3 dB/37 dB/32 dB, switchable |
Voltage gain: | 39.3 dB |
Input impedance: | 20 kohms (balanced), 10 kohms (unbalanced) |
Input connectors: | 4 x XLR |
Output connectors: | 4 x Speaker, 4 x XLR feed-through output |
Circuitry: | Class D |
Protection: | Soft start, short circuit, over load, over heat, clip limit, RF and VHF signals |
Cooling: | 2 temperature-controlled fans, front-to-rear |
Controls: | Power switch, level control, mode switch (stereo,parallel,bridged), input sensitivity |
LED indicators: | protect, clip, signal, -5 dB, -10 dB, -20 dB (per channel), dB/V mode |
Construction: | Steel chassis, aluminum front |
Dimensions: | 483 x 461 x 91 mm |
| rack installation with 2 U |
Weight: | 9.5 kg |
Power consumption: | 830 1/8 power W |
Frequency range: | 20 - 20000 Hz |
Height: | 8,9 cm |
Depths: | 46,1 cm |
Width: | 48,3 cm |