STAND-ALONE MODE:The laser operates stand-alone and does not need and control. It plays back the content stored on the laser's mainboard.
DMX MODE:The laser can be controlled with a standard DMX controller or DMX software.
ArtNET Control mode
MASTER-SLAVE MODE:One laser sends control commands, the other laser follows these. Works with Stand-Alone modes and Sound-to-Light modes.
LAN MODE:The laser can be controlled over LAN - this can be either direct software control, or ArtNET or similar (depending on the main board)
ILDA MODE:The laser can be controlled over standard ILDA, the analog control signal for laser control. External Digital-Analog-Converters (DACs) can be used.
ILDA Streaming
SHOWNET INSIDE:The laser is equipped with the advanced ShowNET laser mainboard which brings a multitude of features to the laser and makes it an intelligent lighting device.
SHOWEDITOR INCLUDED:The full version of the laser show control software Showeditor is included in delivery.
The ShowNET OEM Set is a special set for the integration of the laser mainboard to laser systems. It is designed for laser manufacturers to easily add multiple features to their devices.
Volume discounts available, starting from 25 units.
- full Showeditor laser show software license included
- fully supported by the
Showcontroller laser software- can be controlled by any professional lighting desk, like GrandMA, Avolites, Chamsys, etc. either via professional DMX or ArtNET
The integration can easily be done by experienced laser technicians. The kit comes with detailed integration instructions. The ShowNET OEM can be powered with 10-25V DC and it usually does not need an additional/separate PSU but can use the same as for the laser sources and/or the scanners.
The ShowNET OEM Set includes an ILDA Switch-board, so the laser can still be used with standard ILDA control signal.
Some hardware features of ShowNET:
| X/Y scanner outputs with 12 bit resolution (4096 different positions on each axis) |
| Color outputs with 8 bit resolution (256 different intensity values per color channel): red, green, blue, intensity linked to green |
| DMX512 input and output (non-isolated) |
| 100 Mbit Ethernet port |
| Flexible IP address setting: static address, DHCP or AutoIP |
| Internal MicroSD card for ILDA file playback (ILDA format code 4/5 RGB), can be accessed via LAN |
| Maximum scan speed ~100.000 points per second |
| Up to 16 devices can be used in parallel for multiprojector laser shows |
| Built-in ArtNet-to-DMX converter |
See https://www.laser-interface.com for more details and a feature overview
