Tascam Series 8P DYNA PreAmp og Compressor

Tascam Series 8P Dyna

8 kanals Mic Preamp med analog compressor og optical S/MUX out

Med fremragende lydspecifikationer og tilslutningsmuligheder og med en enestående mikrofonforforstærker, er Tascam SERIES 8p Dyna et godt valg til både studio og scene. Med dobbelt S / MUX-optiske porte, der er placeret i et robust 1U rackmonteringshus, gør det til en perfekt udvidelsesenhed til en Tascam SERIES 102i eller 208i eller andre S / MUX-udstyrede lydgrænseflader inklusive ADAT, eller bruger den som en stand-alone frontend. Ud over otte separate TRS-udgange har SERIES 8p Dyna også en multi-kanals afbalanceret analog udgang, der f.eks. Forbindes til en BO-16DX / OUT XLR breakoutboks. Og wordclock I / O sikrer perfekt synkronisering, når du bruger flere enheder parallelt eller betjener med andet professionelt udstyr

Hver mikrofonkanal har individuelt + 48V fantompower switch til brug sammen med kondensatormikrofoner og en letanvendelig, enkeltbetjent analog kompressor med ægte bypass.
Et omfattende display informerer om signalniveauer, komprimering, overbelastning og den aktuelle samplinghastighed.

Tascam har længe været kendt for gennemsigtige, naturlige, for lavt støj-forforstærkere, og de otte fremragende Tascam HDIA (High Definition Instrumentation Architecture) forforstærker kredsløb i SERIES 8p Dyna er dens bedste forforstærkninger endnu: Støjniveauet (EIN) er på –127 dBu, THD er 0,0007%, det dynamiske interval er 116 dB, og krydsstemningsdæmpningen er 119 dB. En letanvendelig, enkeltbetjent analog kompressor med ægte bypass på hver kanal håndterer varme indgangssignaler og skaber jævn lydindgang.


Eight-channel microphone preamp with eight analogue outputs and multi-channel optical outputs
Can be used as a standalone analogue mic preamp to expand any mixer or recording device
Ideal to add studio-ready audio inputs to a Tascam SERIES 102i/208i or US-20x20 via a single cable
Two S/MUX optical ports can output all eight channels up to a sampling rate of 96 kHz 8 outputs at 44.1/48 kHz
8 outputs at 88.2/96 kHz
4 outputs at 176.4/192 kHz

Tascam HDIA mic preamps use instrumentation amplifiers and have outstanding specifications, enabling them to provide clear, natural sound with super-low noise
Eight balanced XLR/TRS combo input jacks

Channels 1–2 on the front can be used for guitars, basses and other instruments with high-impedance output
48V phantom power can be provided to each input channel independently
Each input channel has its own single-knob analogue compressor with true bypass
25-pin D-sub and eight separate TRS analogue balanced outputs support a variety of connections with other analogue equipment
Indicators for analogue overload, compressor and digital signals as well as level meters on the front panel
Wordclock input and output (with THRU switch) for flexible audio clock synchronisation with other equipment
AC adapter included (Tascam PS-P1230, with four exchangeable plug inserts)

Options
BO-16DX/OUT can be used to provide 16 XLR balanced outputs (for up to two SERIES 8p Dyna units)


Specifications

General

Sampling frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Quantization bit depth 24-bit
Audio input/output channels 8 channels



Analogue audio inputs

Mic inputs (1–2 set to MIC/LINE, 3–8) Combo connector, XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance 2.4 kO
Nominal input level -58 dBu (0.001 Vrms, gain knob max.)
-6 dBu (0.388 Vrms, gain knob min.)
Maximum input level +10 dBu (2.45 Vrms)
Maximum gain 52 dB
Instrument inputs (1–2 set to INST) 6.3-mm standard TS jack
(Tip: HOT, Sleeve: GND)
Input impedance 1 MO
Nominal input level -58 dBV (0.0012 Vrms, gain knob max.)
-6 dBV (0.501 Vrms, gain knob min.)
Maximum input level +10 dBV (3.162 Vrms)
Maximum gain 52 dB
Line inputs (1–2 set to MIC/LINE, 3–8) Combo connector, 6.3-mm TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance 10 kO
Nominal input level -48 dBu (0.003 Vrms, gain knob max.)
+4 dBu (1.228 Vrms, gain knob at min.)
Maximum input level +24 dBu (12.282 Vrms)
Maximum gain 52 dB
Compressor 1-knob analogue compressor
Bypass True hardware bypass
Compression ratio 2:1
Threshold range 40 dB


Analogue audio outputs

Line outputs (balanced, D-sub) 25-pin DB25 connector
Output impedance =100 O
Nominal output level +4 dBu (1.228 Vrms)
Maximum output level +20 dBu (7.75 Vrms)
Line outputs (balanced, TRS) 6.3-mm TRS jack
(Tip: HOT, Ring: COLD, Sleeve: GND)
Output impedance 230 O
Nominal output level +4 dBu (1.228 Vrms)
Maximum output level +20 dBu (7.75 Vrms)


Digital audio outputs

OPTICAL OUT (S/MUX) 2 × optical (JEITA RC-5720C)
Signal format Multi-channel optical format
(supports S/MUX2 at 88.2 kHz and 96 kHz and S/MUX4 at 176.4 kHz and 192 kHz)
Output channels S/MUX (44.1/48 kHz) A: channels 1–8
B: channels 1–8
Output channels S/MUX2 (88.2/96 kHz) A: channels 1–4
B: channels 5–8
Output channels S/MUX4 (176.4/192 kHz) A: channels 1–2
B: channels 3–4


Control inputs and outputs

Wordclock input BNC
Input voltage 2–5 Vpp
Input impedance 75 O ±10 %
Termination Switchable on/off
Permissible frequency deviation during external synchronization ±100 ppm

Wordclock output/throughput BNC (with OUT/THRU switch)
Input voltage 2 Vpp (at 75 O load)
Output impedance 75 O ±10 %
Sampling frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz


Audio performance

Equivalent input noise =–127 dBu
Frequency response
Mic/line input to line output 20 Hz – 40 kHz, ±0.5 dB (JEITA)
40–80 kHz, ±5 dB (JEITA)
Mic/line input to digital output 44.1/48 kHz: 20 Hz – 20 kHz, ±0.5 dB (JEITA)
88.2/96 kHz: 20 Hz – 40 kHz, ±0.5 dB (JEITA)
176.4/192 kHz: 20 Hz – 80 kHz, ±5 dB (JEITA)
S/N ratio
Mic/line/inst input to line output =116 dB (GAIN knob at minimum, JEITA)
Mic/line/inst input to digital output =113 dB (44.1/48 kHz, 88.1/96 kHz)
=111 dB (176.4/192 kHz)
Distortion
Mic/line input to line output =0.0007%
(1 kHz sine wave, maximum input level, GAIN knob at minimum)
Mic/line/inst input to digital output =0.001%
(1 kHz sine wave, maximum input level, GAIN knob at minimum)
Crosstalk attenuation
Mic/line input to line output =119 dB (1 kHz sine wave, GAIN knob at minimum)
Mic/line input to digital output =114 dB (1 kHz sine wave, GAIN knob at minimum)


Power supply and other specifications

Power requirements DC 12 V via dedicated AC adapter (PS-P1230)
Dimensions (W × H × D) 482 mm × 45 mm × 229 mm
Weight 2.6 kg
Permissible operating temperature range 0–40 °C
Included accessories AC adapter (Tascam PS-P1230 with four exchangeable plug inserts), rackmount screw kit, owner’s manual